Check out our spotlight on industry-leading equipment for every need.
Check out our spotlight on industry-leading equipment for every need.
Check out our spotlight on industry-leading equipment for every need.
DMG MORI Seiki NTX2000SZM/1500 SPECIFICATIONS: Maximum workpiece swing diameter mm (in.) 660 (25.9) Swing over cross slide: – Standard mm (in.) 660 (25.9) – Turret 2 mm (in.) 300 (11.8) Maximum turning diameter: – Standard mm (in.) 610 (24.0) – B-axis 90 mm (in.) 660 (25.9) – Turret 2 mm (in.) 274 (10.7) Maximum turning length mm (in.) 1,540 (60.6) Travel X-axis mm (in.) 495 <470+25> (19.5 <18.5+1.0>) Y-axis mm (in.) ?125 (?4.9) Z-axis mm (in.) 1,560 (61.4) +215 (8.5) B-axis 120 X2-axis mm (in.) 160 (6.3) Z2-axis mm (in.) 1,402 (55.2) Spindle 1 Maximum spindle speed: – Standard min-1 5,000 – For 80 mm (3.1 in.) bar work capacity specifications min-1 [4,000] Number of spindle speed ranges 1 Type of spindle nose: – Standard A2-6 – For 80 mm (3.1 in.) bar work capacity specifications [A2-8] Through-spindle hole diameter: – Standard mm (in.) 73 (2.9) Minimum spindle indexing increment 0.0001 Spindle bearing inner diameter: – Standard mm (in.) 120 (4.7) – For 80 mm (?3.1 in.) bar work capacity specifications mm (in.) [140 (?5.5)] Spindle torque <15%ED/30 min/cont>: – Standard Nm (ftlbf) 230/178/159 (169.6/131.3/117.3) – High-torque Nm (ftlbf) [358/231/214 (264.0/170.4/157.8)] Spindle 2 Maximum spindle speed min-1 5,000 Number of spindle speed ranges 1 Type of spindle nose A2-6 Through-spindle hole diameter mm (in.) 73 (2.9) Minimum spindle indexing increment 0.0001 Spindle bearing inner diameter mm (in.) ?120 (?4.7) Spindle torque <15%ED/30 min/cont> Nm (ftlbf) 230/178/159 (169.6/131.3/117.3) Tool spindle Number of tool stations 1 Minimum B-axis indexing increment 0.0001 Maximum tool spindle speed min-1 12,000 Taper hole of rotary tool spindle Capto C6 [BT40] [CAT40] [HSK-A63] [KM-63] Type of retention knob DMG MORI SEIKI 90 Inner diameter of rotary tool spindle bearing mm (in.) 70 (2.7) Tool storage capacity 38 [76] Maximum tool diameter mm (in.) 70 (2.7) Maximum tool diameter mm (in.) 125 (4.9) Maximum tool length mm (in.) 300 (11.8) Maximum tool mass kg (lb.) 8 (17.6) [10 (22)] Tool changing time sec 1.25 Spindle torque <10%ED/cont> Nm (ftlbf) 120/44 (88.5/32.5) Turret 2 Number of tool stations 10 Turret Indexing time <1-station> sec 0.19 Shank height for square tool mm (in.) 20 (0.8) Diameter of boring bar shank part mm (in.) Max. 32 (1.2) Live tooling on turret Feedrate Rapid traverse rate: – X-axis mm/min (ipm) 40,000 (1,574.8) – Y-axis mm/min (ipm) 40,000 (1,574.8) – Z-axis mm/min (ipm) 40,000 (1,574.8) – X2-axis mm/min (ipm) 30,000 (1,181.1) – Z2-axis mm/min (ipm) 38,000 (1,496.1) – A-axis mm/min (ipm) 30,000 (1,181.1) Motors Spindle 1 drive motor <30 min/cont> kW (HP) 22/18.5 (30/24.7) Spindle 2 drive motor <30 min/cont> kW (HP) 22/18.5 (30/24.7) Tool spindle drive motor <10 min/cont> kW (HP) 18.5/11 (24.7/15) Power Sources Electrical power supply kVA 79.9 Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 650 (171.6) Tank Capacity Coolant tank capacity L (gal.) 675 (178.2) Machine Size Machine height mm (in.) 2,621 (103.2) Floor space mm (in.) 4,080 x 2,980 (160.6 x 117.3) Mass of machine: – Tool storage capacity: 38 tools kg (lb.) 15,270 (33,594) – Tool storage capacity: 76 tools kg (lb.) [15,780 (34,716)] Equipped With Fanuc 31iB5 CNC control Main and Sub Spindle Milling Spindle 12,000 RPM Lower turret with Live tooling coolant system chip conveyor (2) Kitagawa N08 Chucks (Non Thru) **Note: This machine is equipped with Non-Through Hole Chuck Packages
No description.
2012 CASE 580N BACKHOE 2012 CASE 580N LOADER BACKHOE WITH ONLY 2500HRS. UNIT HAS 4X4, EROPS WITH HEAT/AC, MP BUCKET, E-STICK, AUX HYDRAULICS, PILOT CONTROLS, AND A TIER 3 ENGINE. SPECIFACATIONS: Selected Dimensions Backhoe J. Load Height – Std 11.8 ft in 3590 mm K. Reach From Swivel – Std 18.3 ft in 5570 mm L. Dig Depth – Std 14.8 ft in 4500 mm M. Reach at Load Height – Std 6.7 ft in 2040 mm Dimensions A. Transport Length 23.4 ft in 7140 mm B. Transport Width 6.8 ft in 2070 mm C. Transport Height 10.8 ft in 3300 mm D. Wheelbase 7 ft in 2130 mm E. Ground Clearance 1.2 ft in 380 mm F. Height to Top of Cab 8.9 ft in 2720 mm Loader G. Clearance at Max Dump Height 8.8 ft in 2690 mm H. Reach at Max Dump Height 2.6 ft in 801 mm I. Dig Depth 6.1 in 155 mm Specification Engine Make Case Model 445T/M3 Net Power 79 hp 58.9 kw Gross Power 85 hp 63.4 kw Displacement 274 cu in 4.5 L Power Measured @ 2200 rpm Torque Measured @ 1400 rpm Number of Cylinders 4 Net Max Torque 270 lb ft 366.1 Nm Aspiration Turbocharged Operational Operating Weight 2wd 14564 lb 6606.1 kg Operating Weight 4wd 15862 lb 7194.9 kg Max Weight 17454 lb 7917 kg Fuel Capacity 42 gal 159 L Hydraulic System Fluid Capacity 28 gal 106 L Oil System Fluid Capacity 3.6 gal 13.6 L Cooling System Fluid Capacity 4.4 gal 16.8 L Transmission Fluid Capacity 5 gal 19 L Front Axle Fluid Capacity 2 gal 7.7 L Rear Axle Fluid Capacity 3.6 gal 13.6 L Turning Radius 11.3 ft in 3450 mm Tire Size Front – 2wd / 4wd 11L x 16 / 12x 16.5 Rear Tires Size 2wd/4wd 19.5L x 24 Operating Voltage 12 V Alternator Supplied Amperage 120 amps Transmission Type Power shuttle syncromesh Number of Forward Gears 4 Number of Reverse Gears 4 Max Speed – Forward 24.3 mph 39.1 km/h Max Speed Reverse 29.1 mph 46.8 km/h Backhoe Dig Depth – Std 14.8 ft in 4500 mm Dig Depth – Ext 18.2 ft in 5550 mm Reach From Swivel – Std 18.3 ft in 5570 mm Reach From Swivel – Ext 21.7 ft in 6600 mm Load Height – Std 11.8 ft in 3590 mm Load Height – Ext 14.1 ft in 4300 mm Reach at Load Height – Std 6.7 ft in 2040 mm Reach at Load Height – Ext 9.3 ft in 2840 mm Loader Bucket Capacity 0.88 yd3 0.67 m3 Bucket Width 82 in 2082.8 mm Clearance at Max Dump Height 8.8 ft in 2690 mm Reach at Max Dump Height 2.6 ft in 801 mm Dig Depth 6.1 in 155 mm Hydraulic Pump Type Gear Pump Flow Capacity 28.5 gal/min 107.9 L/min Relief Valve Pressure 3350 psi 23097.4 kPa Dimensions Transport Length 23.4 ft in 7140 mm Transport Width 6.8 ft in 2070 mm Transport Height 10.8 ft in 3300 mm Height to Top of Cab 8.9 ft in 2720 mm Wheelbase 7 ft in 2130 mm Ground Clearance 1.2 ft in 380 mm
4320 hours, cab, AC, heat, quick coupler, 3rd valve, 4yrd bucket, radial tires, ride control
Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate, 2 double acting hydraulics required.
The 2013 Skyjack Lift SJIII 3219 is a compact and dependable solution for indoor elevated work. With a 550 lbs lifting capacity, it’s ideal for maintenance, installation, and warehouse tasks. This electric lift offers smooth operation, solid non-marking tires, and compact dimensions that allow easy access through doorways and tight spaces. Fully refurbished and safety-inspected, this unit includes a valid inspection sticker, 30-day warranty, and financing options. Whether you’re working in commercial, retail, or industrial settings, the Skyjack SJIII 3219 delivers reliable height access in a clean and efficient package. Ideal Use Cases for the Skyjack Lift: Indoor facility maintenance Warehouse stock picking Electrical and HVAC installation Retail and commercial ceiling work Compact-space elevated access
3894 Hrs, Detroit V8 Diesel Engine, Enclosed cab, Dual controls, 28" compaction wheel width, 111" Straight blade
6 CYL JD ENGINE, 8 SPD TRANS, 6X6, 17.5-25 TIRES, REAR RIPPER, PUSH BLOCK, ENCLOSED CAB W/ A/C & HEAT - TOP CON SYSTEM INCLUDED Vehicle Options Air Conditioning Enclosed Cab Heat Ripper
The FUNDEX F3500 is one of the larger models in the range of Fundex Equipment multifunctional foundation rigs. The F3500 can be used for various foundation techniques such as double drilling, soil mixing, sheet pile push pull system, pile driving and vibratory hammers.
Cab with Heat and Air Conditioning Radio 5.5 yd pin-on GP bucket 26.5R25 Tires Joystick steering with secondary steering Ride control Diff lock Autoshift VIMS info system Weight measuring Emissions decal available If sold within Finning territory: 2 year Customer Value Agreement (Preventative Maintenance program): via Cat Credit certificate. Contact Sales Rep for more details. Conditions may apply.
KONGSKILDE PBG - 18ft working width.
MORI S 30 drill for sale in great condition. It has a brand new engine, wireline winch and mast extention, stabilizers and brand new runber tracks
Brand new, compact and powerful M20A drill rig with 99 HP engine. Designed to be split into pieces for easy transport (I.E helicopter transport to the remote areas). Up to 5 '' air hammer drilling diameter.
Walkie straddle
• LIKE NEW PAVER - LOADED UP WITH • 8' TO 15' HD PRO SCREED • HYDRAULIC TOW POINTS • TOPCON WIRING ONLY • HEATED ENDGATES • SINGLE POINT LUBE SYSTEM - SCREED • BERM EXTENSIONS • POLY PAD TRACKS • 125 HP KUBOTA ENGINE
Extensive Equipment Collection
Discover a vast selection of new and used equipment from top manufacturers, all available for purchase through our marketplace. Manufacturers, distributors, and sellers can claim their profiles and list equipment with a small monthly subscription fee.
11M+ Users Worldwide
Join a global community of over 11 million users exploring our comprehensive equipment marketplace and wiki. Benefit from detailed manufacturer and model information while connecting with sellers and buyers worldwide.
Seamless Listing Process
Enjoy a user-friendly interface for manufacturers, distributors, and sellers to claim profiles and list equipment with a simple monthly subscription. Quickly upload photos, set competitive prices, and manage listings with real-time updates and analytics.
Trusted Buyer Community
Connect with a verified network of buyers seeking both new and used equipment, ensuring secure and reliable transactions. Benefit from buyer ratings, transaction history, and a safe platform designed to foster trust and confidence.
Custom Equipment Alerts
Receive personalized notifications for new listings or price drops on your preferred equipment models, ensuring you never miss a deal. Tailor your alerts based on brand, condition, or location to streamline your search process.
Equipment Comparison Tool (Coming soon)
Utilize an advanced tool to compare models side-by-side, analyzing features, prices, and user reviews from our wiki. Make confident decisions with detailed data visualizations tailored to your needs.
Sell with Ease.
Unlock your sales potential with simple tools.
Grow Your Brand.
Elevate your presence with tailored options.
